■ Memory clearing
Contents of programmed memories can be cleared (blanked),
if desired.
➀ Push [S.MW] momentarily.
➁ Select the memory channel to be cleared with the tuning
dial.
➂ Push [S.MW] briefly, then a second time for 1 sec.
• 3 beeps sound, then the frequency is cleared.
•“!” flashes continuously.
• Scan edges and call channel cannot be cleared.
➃ Push any switch to stop the flashing.
[EXAMPLE]: Clearing memory channel 20.
NOTE:
Be careful—the contents of cleared memories CANNOT
be recalled.
• Memory channel 0 and scan edge channels 1A/1b cannot be
cleared.
Memory clearing may not be performed from the
microphone.
6
MEMORY OPERATION
36
To Next Page
Loading...
