EasyManua.ls Logo

Icom IC-2710H

Icom IC-2710H
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WIRELESS OPERATION
16
66
Connection
Wireless remote control is available when the following op-
tions are used:
HM-90
WIRELESS MICROPHONE
EX-1759
INFRARED RECEIVER
The BC-96
MICROPHONE HOLDER
is additionally recommended
for use with the HM-90, since the HM-90s internal battery re-
quires charging.
D Recommended connection
HM-90
WIRELESS MICROPHONE
The HM-90s internal battery should be charged when the mi-
crophone is not being held.
Charging period: 1.5 hrs. with timer
(or 8 hrs. when battery is exhausted)
Operating period: 12 hrs (Operation : standby= 1 : 4)
D Charging method
Choose a method from one of the following:
Connect the cable from the HM-90 to the EX-1759.
Connect the BC-96 and EX-1759; then put the HM-90 into
the BC-96 (refer to the diagram at left).
Use the CP-1
CIGARETTE LIGHTER CABLE
to connect the
BC-96 and cigarette lighter socket.
D Turning the wireless remote ON/OFF
When you use the HM-90 as a wired microphone, turn OFF
the wireless remote control circuit if desired.
LOCK
AFC AFC-OFF PTT-M MW
PGR
CALL
123A
456B
MR VFO CLR
C-SQL DTMF D-OFF
HIGH MID LOW SET
The diagram shows that
the wireless remote con-
trol function is turned
ON.
Dip switch
1 2 3 4
ON
OFF
optional EX-1759 and HM-90
IC-2710H EX-1759
BC-96
Use the
microphones
cable
HM-90
IC-2710H.qxd 02.2.8 16:55 Page 66 (1,1)

Table of Contents

Other manuals for Icom IC-2710H

Related product manuals