17
OTHER FUNCTIONS
73
■ Auto power-off
The auto power-off function conveniently turns the transceiver
power OFF after a preset time in which no operations are per-
formed. In this way, when you forget to turn the power OFF,
the transceiver automatically turns itself OFF, thereby con-
serving battery power.
The time can be set to 30 min., 1 hr., 2 hr. or turned OFF. The
selected time is retained even when the transceiver is turned
OFF via the auto power-off function. To cancel the function,
select “oF” in step ➃ below.
➀ Push [POWER] to turn power
OFF.
➁ While pushing [(VOL)SET L],
turn power ON to enter initial
set mode.
➂ Push [(VOL)SET L] one or
more times until “PoF” appears.
• Pushing [
(SQL)MONI] reverses the order of selection.
➃ Rotate the left-hand tuning dial to select the desired auto
power-off time or turn the timer OFF (“oF”).
•“AO” appears when an auto power-off time is set.
➄ Push [POWER] momentarily to exit initial set mode.
■ Cooling fan
setting
The transceiver has a heatsink and cooling fan to radiate
heat. The cooling fan automatically turns ON while transmit-
ting and remains ON for 2 min. after transmitting. The cool-
ing fan can be activated continuously, if desired.
➀ Push power to turn power OFF.
➁ While pushing [(VOL)SET L], turn power ON to enter initial
set mode.
➂ Push [(VOL)SET L] one or more times until “FAn” appears.
• Pushing [
(SQL)MONI] reverses the order of selection.
➃ Rotate the left-hand tuning dial to set the cooling fan to au-
tomatic (“At”) or continuous (“on”).
➄ Push [POWER] momentarily to exit initial set mode.
USING
INITIAL SET MODE
USING
INITIAL SET MODE
To Next Page
Loading...
