13
PAGER AND CODE SQUELCH
59
■ Pager operation
D Calling a specific station
➀ Push the desired band’s tuning dial.
➁ Set the operating frequency.
➂ Push [DTMF] 2 times to turn the pager function ON.
•“P” appears in place of the 100 MHz digit.
• An optional tone squelch can be used together with the pager
function, although the pocket beep cannot be used. (p. 54)
➃ Select the desired code channel:
➥ Push [SET].
➥ Rotate the selected band’s tuning dial to select the code chan-
nel.
➥ Push the selected band’s tuning dial to exit the setting display.
➄ Push [PTT] to transmit the pager code.
➅ Wait for an answer back.
• When the transceiver receives an answer back code, the func-
tion display shows the other parties’ ID or group code and beeps.
(p. 60)
➆ After confirming a connection, push the selected band’s
tuning dial to display the operating frequency.
• DO NOT push numeral keys on the microphone while a 3-digit
code is indicated, or code channel contents are changed.
➇ Push [DTMF] once to select code squelch or 2 times (or 3
times for U.S.A. version) to select the non-selective calling
system.
Ä Push [BAND] to select the desired band, if nec-
essary.
Å Set the operating frequency.
Ç Push [FUNC] then push [➃PGR] to turn the
pager function ON.
•“P” appears in place of the 100 MHz digit.
• An optional tone squelch can be used together with
the pager function. (p. 54)
É Select the desired code channel:
➥ Push [FSET].
➥ Push [Y] or [Z] to select the code channel.
➥ Push [ECLR] to exit the setting display.
Ñ Push [PTT] to transmit the pager code.
Ö Wait for an answer back.
• When the transceiver receives an answer back
code, the function display shows the other parties’
ID or group code and beeps. (p. 60)
Ü After confirming a connection, push [ECLR] to
display the operating frequency.
• DO NOT push numeral keys on the microphone
while a 3-digit code is indicated, or code channel
contents are changed.
á Push [FUNC] then [➄C SQL] to select code
squelch or push [ECLR] to select the non-se-
lective calling system.
• Pushing [FUNC] then [FD-OFF] also selects the
non-selective calling system.
To Next Page
Loading...
