PANEL DESCRIPTION
1
1
q POWER SWITCH [POWER]
Turns power ON and OFF when pushed for 1 sec.
w TUNING DIALS
➥ Select the operating frequency (p. 17), the memory
channel (p. 32), the contents of the set mode display
(p. 82) and the scanning direction. (p. 42)
➥ Select the main band when pushed. (p. 15)
➥ When the sub band is selected, activate the sub band
function when pushed and held. (p. 22)
➥ When the main band is selected, change the operating
band (for para watch) when pushed and held. (p. 24)
e SQUELCH CONTROLS [SQL(MONI)]
➥ Vary the squelch level. (p. 20)
• RF attenuator activates and increases the attenuation when
rotated clockwise to the center position and further.
➥ Toggles squelch opened and closed when pushed.
• Transmit frequency is automatically selected when squelch
opens.
r VOLUME CONTROLS [VOL(SET L)]/[VOL(SET D)]
➥ Adjust the audio levels. (p. 20)
➥ Select set mode when pushed. (p. 82)
➥ Toggles the lock function ON/OFF when pushed and
held [SET
(L)]. (p. 16)
➥ Allows you to adjust the display brightness when
pushed and held [SET
(D)]. (p. 74)
To Next Page
Loading...
