Icom IC-2710H

SPECIFICATIONS
19
78
General
• Frequency coverage
VERSION VHF UHF
144–148 MHz
440–450 MHz
Asia
144–148 MHz
430–440 MHz
Europe 144–146 MHz 430–440 MHz
Italy
144–146 MHz 430–440 MHz
Tx
Rx
136–174 MHz*
2
Tx
Rx
136–174 MHz*
2
400–479 MHz*
3
*
1
118–136 MHz is usable in the VHF display only; guaranteed frequency cov-
erage is 144–148 MHz.
*
2
Guaranteed frequency coverage is 144–148 MHz.
*
3
Guaranteed frequency coverage is 430–440 MHz.
• Mode : FM, AM*
(*U.S.A. version only; 118–136 MHz)
• Antenna impedance : 50 Ω (SO-239)
• Power supply requirement : 13.8 V DC ± 15%
• Usable temperature range : –10°C to +60°C; +14°F to +140°F
• Dimensions : 140(W) x 40(H) x 212.4(D) mm
(projections not included) 5
1
⁄2(W) x 1
9
⁄16(H) x 8
3
⁄8(D) in
• Weight : 1.4 kg; 3.1 lb
Transmitter
• Modulation system : Variable reactance frequency
modulation
• Max. frequency deviation : ± 5.0 kHz
• Spurious emissions : Less than –60 dB
• Microphone impedance : 600 Ω (8-pin modular)
• Output power and current drain:
Receiver
• Receive system : Double conversion superheterodyne
• Intermediate frequencies :
Left display band 1st 45.05 MHz 2nd 455 kHz
Right display band 1st 57.65 MHz 2nd 455 kHz
• Sensitivity (for 12 dB SINAD) : Less than 0.16 µV (incl. para watch)
• Squelch sensitivity : Less than 0.13 µV
(at threshold)
• Selectivity : More than 15 kHz/–6 dB
Less than 30 kHz/–60 dB
• Spurious response : More than 60 dB
rejection ratio
• Audio output power : More than 2.4 W at 10% distortion
with the 8 Ω internal speaker
• Current drain :
Max rated audio/both bands 1.8 A
Max audio/either band 1.5 A (squelch closed on other band)
Squelched on both bands 1.2 A
CONDITION POWER
144 MHz
50 W
10 W
5 W
430(440) MHz
12.0 A
6.5 A
4.5 A
11.0 A35 W
10 W 6.5 A
5 W 4.5 A
High
Low
Mid
High
Mid
Low
All stated specifications are subject to change without notice or
obligation
CURRENT
U.S.A.
118–174 MHz*
1
Rx
Tx
IC-2710H.qxd 02.2.8 16:55 Page 78 (1,1)