18-7
D Command table (continued)
18
CONTROL COMMAND
Cmd. Sub Cmd. Data Description
1A* 05 0148 00 or 01 Send/read external keypad set for voice
memory (00=OFF, 01=ON)
0149 00 or 01 Send/read external keypad set for memory
keyer (00=OFF, 01=ON)
0150 00 or 01 Send/read screen capture by the [POWER]
switch (00=OFF, 01=ON)
0151 00 or 01 Send/read screen capture by the [Print
Screen] key on the keyboard
(00=OFF, 01=ON)
0152 00 or 01 Send/read captured screen image data
saving memory device
(00=SD card, 01=USB flash drive)
0153 00 or 01 Send/read screen capture image data saving
format (00=PNG format, 01=BMP format)
0154 00 or 01 Send/read the Shutdown function
(00=Shutdown, 01=Standby/Shutdown)
0155 00 or 01 Send/read CI-V transceive set
(00=OFF, 01=ON)
0156 0000 to
0223
Send/read the transceive CI-V Address for
LAN to REMOTE in hexadecimal code
(0000=00h to 0223=DFh)
0157 00 or 01 Send/read antenna controller status
(frequency, and so on) data output from
[REMOTE] (00=OFF, 01=ON)
0158 00 or 01 Send/read echo back setting for CI-V
operation (00=ON, 01=OFF)
0159 00 to 03 Send/read data transfer speed for RTTY or
PSK decode output from USB B
( 00=4800 bps, 01=9600 bps, 02=19200 bps,
03=38400 bps)
0160 00 to 04 Send/read transmission control line setting
for USB B
( 00=OFF, 01=USB1 DTR, 02=USB1 RTS,
03=USB2 DTR, 04=USB2 RTS)
* Different line must be set from both CW
keying and RTTY (FSK)
0161 00 to 04 Send/read CW keying line setting for USB B
( 00=OFF, 01=USB1 DTR, 02=USB1 RTS,
03=USB2 DTR, 04=USB2 RTS)
* Different line must be set from both
transmission control and RTTY (FSK)
0162 00 to 04
Send/read RTTY (FSK) line setting for USB B
( 00=OFF, 01=USB1 DTR, 02=USB1 RTS,
03=USB2 DTR, 04=USB2 RTS)
* Different line must be set from both CW
keying and transmission control
0163 00 to 10 Send/read keyboard type
( 00=English, 01=Japanese,
02=United Kingdom, 03=French, 04=French
(Canadian), 05=German, 06=Portuguese,
07=Portuguese (Brazilian), 08=Spanish,
09=Spanish (Latin American), 10=Italian)
0164 0010 to
0100
Send/read keyboard repeat delay
( 0010=100 msec., 0100=1000 msec.
; 50 msec. steps)
0165 00 to 31 Send/read keyboard repeat rate
(00=2.0 cps to 31=30.0 cps)
0166 00 to 02 Send/read mouse pointer speed
(00=Slow, 01=Mid, 02=Fast)
0167 00 or 01 Send/read mouse pointer speed acceleration
(00=OFF, 01=ON)
0168 00 or 01 Send/read DHCP client setting (auto IP
address setting using DHCP server)
(00=OFF, 01=ON)
0169 Send/read IP address setting (fixed setting)
( 0000000000000001 (0.0.0.1) to
0255025502550254 (255.255.255.254))
*Usable when the DHCP client setting is OFF
0170 Read the IP address set by the DHCP server
( 0000000000000001 (0.0.0.1) to
0255025502550254 (255.255.255.254))
* If the DHCP client setting is OFF, sends
back the manually set IP address (fixed IP
address)
0171 01 to 30 Send/read subnet mask
(01=128.0.0.0 to 30=255.255.255.252)
Cmd. Sub Cmd. Data Description
1A* 05 0172 Send/read default gateway
( 0000000000000001 (0.0.0.1) to
0255025502550254 (255.255.255.254),
FF=Blank)
*Usable when the DHCP client setting is OFF
0173 Send/read primary DNS (Domain Name
System) server address
( 0000000000000001 (0.0.0.1) to
0255025502550254 (255.255.255.254),
FF=Blank)
*Usable when the DHCP client setting is OFF
0174 Send/read secondly DNS (Domain Name
System) server address
( 0000000000000001 (0.0.0.1) to
0255025502550254 (255.255.255.254),
FF=Blank)
*Usable when the DHCP client setting is OFF
0175 see p. 18-11 Send/read network name when remotely
operating using the optional RS-BA1
(up to 15-character)
0176 00 or 01 Send/read the remote control setting
(00=OFF, 01=ON)
0177 000001 to
065535
Send/read the control port setting by
accessing from internet
(000001=1 to 065535=65535)
0178 000001 to
065535
Send/read the serial port setting by
accessing from internet
(000001=1 to 065535=65535)
0179 000001 to
065535
Send/read the audio port setting by
accessing from internet
(000001=1 to 065535=65535)
0180 00 or 01 Send/read the internet access line setting
( 00=FTTH (Fiber To The Home),
01=ADSL/CATV)
0181 see p. 18-11 Send/read Network radio name
(up to 16-character)
0182 00 or 01 Send/read scope indication during TX
(00=OFF, 01=ON)
0183 00 to 02 Send/read scope max. hold
(00=OFF, 01=ON)
0184 00 to 02 Send/read scope center frequency set
( 00=Filter center, 01=Carrier point center,
02=Carrier point center (Abs. Freq.))
0185 00 or 01 Send/read scope marker position setting
during fix type scope
(00=Filter center, 01 Carrier point)
0186 00 or 01 Send/read external monitor signal width
(00=Narrow, 01=Wide)
0187 00 to 03 Send/read averaging function for spectrum
scope
( 00=OFF,
01=Averaging the two observations,
02=Averaging the three observations,
03=Averaging the four observations)
0188 00 or 01 Send/read spectrum display type
(00=Fill, 01=Fill+Line)
0189 see p. 18-11 Send/read spectrum fill color
0190 see p. 18-11 Send/read spectrum line color
0191 see p. 18-11 Send/read spectrum color for peak hold
0192 00 or 01 Send/read waterfall set for spectrum scope
(00=OFF, 01=ON)
0193 00 to 02 Send/read waterfall speed
(00=Slow, 01=Mid, 02=Fast)
0194 00 to 02 Send/read waterfall height when expanded
scope is selected
(00=Small, 01=Mid, 02=Larger)
0195 00 to 09 Send/read peak color level set for waterfall of
the spectrum scope
( 00=Grid 1, 01=Grid 2, 02=Grid 3, 03=Grid 4,
04=Grid 5, 05=Grid 6, 06=Grid 7, 07=Grid 8,
08=Grid 9, 09=Grid 10)
0196 00 or 01 Send/read the Main and Sub scope screen
arrangement during dual scope
(00=Up and down, 01=Left and right)
To Next Page
Loading...
