D Command table (continued)
18-8
18
CONTROL COMMAND
Cmd. Sub Cmd. Data Description
1A* 05 0197 00 or 01 Send/read the Main/Sub scope access
setting linked to the [MAIN]/[SUB] key
operation
(00=OFF, 01=ON)
0198 see p. 18-11 Send/read scope edge 1 frequencies for 0.03
to 1.60 MHz band
0199 see p. 18-11 Send/read scope edge 2 frequencies for 0.03
to 1.60 MHz band
0200 see p. 18-11 Send/read scope edge 3 frequencies for 0.03
to 1.60 MHz band
0201 see p. 18-11 Send/read scope edge 1 frequencies for 1.60
to 2.00 MHz band
0202 see p. 18-11 Send/read scope edge 2 frequencies for 1.60
to 2.00 MHz band
0203 see p. 18-11 Send/read scope edge 3 frequencies for 1.60
to 2.00 MHz band
0204 see p. 18-11 Send/read scope edge 1 frequencies for 2.00
to 6.00 MHz band
0205 see p. 18-11 Send/read scope edge 2 frequencies for 2.00
to 6.00 MHz band
0206 see p. 18-11 Send/read scope edge 3 frequencies for 2.00
to 6.00 MHz band
0207 see p. 18-11 Send/read scope edge 1 frequencies for 6.00
to 8.00 MHz band
0208 see p. 18-11 Send/read scope edge 2 frequencies for 6.00
to 8.00 MHz band
0209 see p. 18-11 Send/read scope edge 3 frequencies for 6.00
to 8.00 MHz band
0210 see p. 18-11 Send/read scope edge 1 frequencies for 8.00
to 11.00 MHz band
0211 see p. 18-11 Send/read scope edge 2 frequencies for 8.00
to 11.00 MHz band
0212 see p. 18-11 Send/read scope edge 3 frequencies for 8.00
to 11.00 MHz band
0213 see p. 18-11 Send/read scope edge 1 frequencies for
11.00 to 15.00 MHz band
0214 see p. 18-11 Send/read scope edge 2 frequencies for
11.00 to 15.00 MHz band
0215 see p. 18-11 Send/read scope edge 3 frequencies for
11.00 to 15.00 MHz band
0216 see p. 18-11 Send/read scope edge 1 frequencies for
15.00 to 20.00 MHz band
0217 see p. 18-11 Send/read scope edge 2 frequencies for
15.00 to 20.00 MHz band
0218 see p. 18-11 Send/read scope edge 3 frequencies for
15.00 to 20.00 MHz band
0219 see p. 18-11 Send/read scope edge 1 frequencies for
20.00 to 22.00 MHz band
0220 see p. 18-11 Send/read scope edge 2 frequencies for
20.00 to 22.00 MHz band
0221 see p. 18-11 Send/read scope edge 3 frequencies for
20.00 to 22.00 MHz band
0222 see p. 18-11 Send/read scope edge 1 frequencies for
22.00 to 26.00 MHz band
0223 see p. 18-11 Send/read scope edge 2 frequencies for
22.00 to 26.00 MHz band
0224 see p. 18-11 Send/read scope edge 3 frequencies for
22.00 to 26.00 MHz band
0225 see p. 18-11 Send/read scope edge 1 frequencies for
26.00 to 30.00 MHz band
0226 see p. 18-11 Send/read scope edge 2 frequencies for
26.00 to 30.00 MHz band
0227 see p. 18-11 Send/read scope edge 3 frequencies for
26.00 to 30.00 MHz band
0228 see p. 18-11 Send/read scope edge 1 frequencies for
30.00 to 45.00 MHz band
0229 see p. 18-11 Send/read scope edge 2 frequencies for
30.00 to 45.00 MHz band
0230 see p. 18-11 Send/read scope edge 2 frequencies for
30.00 to 45.00 MHz band
0231 see p. 18-11 Send/read scope edge 1 frequencies for
45.00 to 60.00 MHz band
0232 see p. 18-11 Send/read scope edge 2 frequencies for
45.00 to 60.00 MHz band
Cmd. Sub Cmd. Data Description
1A* 05 0233 see p. 18-11 Send/read scope edge 3 frequencies for
45.00 to 60.00 MHz band
0234 00 or 01 Send/read the voice 1st menu.
(00=VOICE-Root, 01=VOICE-PLAY)
0235 00 or 01 Send/read the auto monitor function setting
when transmitting a recorded voice memory
(00=OFF, 01=ON)
0236 01 to 15 Send/read the repeat interval to transmit the
recorded voice audio
(01=1 sec. to 15=15 sec.)
0237 00 or 01 Send/read the QSO recording device setting
(00=SD card, 01=USB flash drive)
0238 00 or 01 Send/read the recording mode.
(00=TX&RX, 01=RX Only)
0239 00 or 01 Send/read recording TX audio for the QSO
recorder
(00=Microphone audio, 01=TX monitor audio)
0240 00 or 01 Send/read the squelch relation to recording
RX audio for the QSO recorder
(00=Always, 01=Squelch Auto)
0241 00 or 01 Send/read the QSO record file split function
setting (00=OFF, 01=ON)
0242 00 or 01 Send/read the PTT Automatic Recording
function setting (00=OFF, 01=ON)
0243 00 to 03 Send/read the RX audio recording status for
the PTT Automatic Recording function
( 00=OFF (records no RX audio),
01=Records the RX audio just before 5 sec.,
02=Records the RX audio just before 10 sec.,
03=Records the RX audio just before 15 sec.
)
0244 00 to 03 Send/read QSO PLAY Skip time
(00=3 sec., 01=5 sec., 02=10 sec., 03=30 sec.)
0245 05 to 30 Send/read the instant record time when
[REC] is pushed
(05=5 sec. to 30=30 sec.)
0246 03 to 10 Send/read the instant playback time when
[PLAY] is pushed
(03=3 sec. to 10=10 sec.)
0247 00 Normal selection for contest number style
01 “190→ANO” selection for contest number
style
02 “190→ANT” selection for contest number
style
03 “90→NO” selection for contest number style
04 “90→NT” selection for contest number style
0248 01 to 08 Send/read count up trigger channel
( 01=M1, 02=M2, 03=M3, 04=M4, 05=M5,
06=M6, 07=M7, 08=M8)
0249 0001 to
9999
Send/read present number
(0001=1 to 9999=9999)
0250 01 to 60 Send/read CW keyer repeat time
(01=1 sec. to 60=60 sec.)
0251 28 to 45 Send/read CW keyer dot/dash ratio
(28=1:1:2.8 to 45=1:1:4.5)
0252 00 to 03 Send/read rise time
( 00=2 msec., 01=4 msec., 02=6 msec.,
03=8 msec.)
0253 00 or 01 Send/read paddle polarity
(00=Normal, 01=Reverse)
0254 00 to 02 Send/read keyer type
(00=Straight, 01=Bug-key, 02=ELEC-Key)
0255 00 or 01 Send/read mic. up/down keyer set
(00=OFF, 01=ON)
0256 00 to 03 Send/read averaging function for RTTY FFT
scope
( 00=OFF,
01=Averaging the two observations,
02=Averaging the three observations,
03=Averaging the four observations)
0257 see p. 18-11 Send/read RTTY FFT scope waveform color
0258 00 or 01 Send/read RTTY decode USOS
(00=OFF, 01=ON)
0259 00 or 01 Send/read RTTY decode new line code
(00=CR,LF,CR+LF, 01=CR+LF)
To Next Page
Loading...
