2-12
2
SET MODE ITEMS
ITEMS DESCRIPTIONS RANGE OR VALUE REF.
Transverter Function Transverter function setting. ON, Auto p. 15-14
Transverter Offset Offset frequency setting for the transverter
operation.
0.000 to 99.999 MHz
(in 1 kHz steps)
RTTY Mark Frequency RTTY mark frequency setting. 1275, 1615, 2125 (Hz)
RTTY Shift Width RTTY shift width setting. 170, 200, 425 (Hz)
RTTY Keying Polarity RTTY keying polarity setting. Normal, Reverse
PSK Tone Frequency PSK tone frequency setting. 1000, 1500, 2000 (Hz)
SPEECH Language Speech language setting for the voice syn-
thesizer.
English, Japanese
SPEECH Speed Speech speed setting for the voice synthe-
sizer.
LOW, HIGH
SPEECH S-Level S-Level announcement setting for the voice
synthesizer.
OFF, ON
SPEECH [MODE] Switch Operating mode speech setting when a
mode switch is pushed.
OFF, ON p. 15-15
Memo Pad Quantity Number of memo pad channel setting. 5, 10
MAIN DIAL Operation [MAIN DIAL] accessible band setting. MAIN, MAIN/SUB
MAIN DIAL Auto TS Automatic tuning step function setting for
[MAIN DIAL].
OFF, LOW, HIGH
SUB DIAL Auto TS Automatic tuning step function setting for
[SUB DIAL].
MIC Up/Down Speed Rate setting for frequency change when the
microphone's [UP]/[DN] switches are held
down.
LOW, HIGH
Quick RIT/∂TX Clear RIT/∂TX frequency quick clearing function
setting.
OFF, ON
[NOTCH] Switch (SSB) for SSB mode Selectable notch
type setting.
Auto, Manual, Auto/Manual
[NOTCH] Switch (AM) for AM mode
DIGI-SEL VR Operation Controllable function setting for the [DIGI-
SEL] control.
DIGI-SEL, APF
FILTER Screen MAIN/SUB Se-
lect
FILTER Screen MAIN/SUB band select set-
ting.
Fix, Auto (by FILTER,PBT Op-
eration)
SSB/CW Synchronous Tuning Displayed frequency shift setting when op-
erating mode is toggled between SSB and
CW.
OFF, ON
OTHERS SET(Continued)
SET [F-7]
OTHERS [F-5]
To Next Page
Loading...
