ITEMS DESCRIPTIONS RANGE OR VALUE REF.
CI-V USB Port Link setting for CI-V signal line between
[USB B] and [REMOTE].
Link to [REMOTE], Unlink from
[REMOTE]
p. 15-18
CI-V USB Baud Rate CI-V data transfer speed setting for the re-
mote control through [USB B].
4800, 9600, 19200, 38400,
57600, 115200 (bps), Auto
CI-V USB Echo Back Echo back setting for the remote control
through [USB B].
OFF, ON
Decode Baud Rate Decode data transfer speed setting for
RTTY and PSK operation.
4800, 9600, 19200, 38400
(bps)
USB SEND Data line setting for the SEND control
through [USB B].
OFF, USB1 DTR, USB1 RTS,
USB2 DTR, USB2 RTS
USB Keying (CW) Data line setting for the CW keying control
through [USB B].
USB Keying (RTTY) Data line setting for the RTTY (FSK) keying
control through [USB B].
p. 15-19
Keyboard Type Language setting for the keyboard. English, Japanese,
United Kingdom, French,
French (Canadian), German,
Portuguese,
Portuguese (Brazilian),
Spanish,
Spanish (Latin American),
Italian
Keyboard Repeat Delay Keyboard repeat delay time setting. 100 ~ 1000 milliseconds
(in 50 milliseconds steps)
Keyboard Repeat Rate Keyboard repeat rate setting. 2.0 ~ 30.0 cps
Mouse Pointer Speed Mouse pointer speed setting. SLOW, MID, FAST
Mouse Pointer Acceleration Mouse Pointer Acceleration setting. OFF, ON
DHCP (Valid after Reboot) DHCP server client setting. OFF, ON
IP Address (Valid after Reboot) Transceiver's IP address setting for IP re-
mote control.
Subnet Mask (Valid after Reboot) Subnet mask setting for the IP remote con-
trol.
Default Gateway (Valid after Re-
boot)
Default gateway setting for the IP remote
control.
Primary DNS Server (Valid after
Reboot)
Primary DNS (Domain Name System) serv-
er address setting for the IP remote control.
OTHERS SET(Continued)
SET [F-7]
OTHERS [F-5]
To Next Page
Loading...
