1-10
4
104
IEI
®
Technology, Corp.
The On-Chip Secondary PCI IDE option allows you to determine if the motherboard
should or should not use the integrated primary IDE channel. Disable this if you use an IDE
adapter card for your IDE hard drives.
Disabled
The CPU card will not use the integrated primary IDE
channel
Enabled
(D
EFAULT) The CPU card will use the integrated primary IDE
channel
On Chip Serial ATA [Disabled]
The On Chip Serial ATA (SATA) option allows you to determine the operational status of
the onboard SATA controller.
Disabled
(D
EFAULT) The SATA controller is disabled
Auto
The SATA controller is automatically arranged
by the BIOS
Combined Mode
PATA and SATA modes are combined together.
A maximum of 2 IDE drives in each channel
Enhanced Mode
Enable both PATA and SATA. A maximum of 6
IDE drives are supported.
SATA Only
SATA is operating in legacy mode.
x PATA IDE Mode [Secondary]
When the On Chip Serial ATA option is in the combined mode, the PATA IDE Mode will be
selected as secondary.
SATA Port
The SATA Port parameter is automatically detected by the system BIOS and shown on the
screen. This parameter is not user configurable.
To Next Page
Loading...
Need help?
General
