1-79
ROCKY-4786EVG CPU Card
79
Frequency/Voltage Control: Configures the CPU Clock Ratio, Auto
Detect DIMM/PCI CLk and Spread Spectrum settings
The following user configurable options are also available in the BIOS Main Menu
Load Fail-Safe Defaults
This option allows you to load failsafe default values for each of the parameters on the
Setup menus. F6 key can be used for this operation on any page.
Load Optimized Defaults
This option allows you to load optimal default values for each of the parameters on the
Setup menus. F7 key can be used for this operation on any page.
Set Supervisor Password
By default, no Supervisor Password is set. If you wish to install a supervisor password,
select this field and enter the password. After this option has been selected, a red dialogue
box with “Enter Password: ” will appear. You will be asked to confirm your password.
Retype the original password into the “Confirm Password: ” dialogue box and press
enter.
Set User Password
By default, no User Password is set. If you wish to install a user password, select this field
and enter the password. After this option has been selected, A red dialogue box with
“Enter Password: ” will appear. You will be asked to confirm your password. Retype the
original password into the “Confirm Password: ” dialogue box and press enter.
Save & Exit Setup
If you have finished making the configuration changes and wish to save them and exit the
BIOS menus, select this option.
To Next Page
Loading...
Need help?
General
