1-88
88
IEI
®
Technology, Corp.
Enabled
(D
EFAULT) The L1 and L2 CPU caches are both turned on
Disabled
The L1 and L2 CPU caches are both turned off
Quick Power On Self Test [Enabled]
The Quick Power On Self Test configuration option speeds up the POST after you turn on
the computer. If it is set to Enable, BIOS will shorten or skip some check items during
POST.
Enabled
(D
EFAULT) Quick POST will occur after the computer is turned on
Disabled
Normal POST will occur after the computer is turned on
Boot Device
There are three Boot Device configuration options. They are:
First Boot Device [DEFAULT: Hard Disk]
Second Boot Device [DEFAULT: Hard Disk]
Third Boot Device [DEFAULT: LS120]
The Boot Device configuration options allow you to select the order of devices the
computer will boot from. Using the default values, the system will first look for an HDD to
boot from. If an HDD is unavailable then the system will boot from a LS120 drive.
Boot Device configuration options are:
Hard Disk
CDROM
ZIP100
USB-FDD
USB-ZIP
USB-CDROM
LAN
Disabled
Floppy
LS120
To Next Page
Loading...
Need help?
General
