1-66
66
IEI
®
Technology, Corp.
4.1 Installation Considerations
NOTE:
The following installation notices and installation considerations should be
read and understood before the CPU card is installed. All installation notices
pertaining to the installation of the CPU card should be strictly adhered to.
Failing to adhere to these precautions may lead to severe damage of the
CPU card and injury to the person installing the CPU card.
4.1.1 Installation Notices
Before and during the installation of the ROCKY-4786EVG CPU Board, please DO the
following:
Read the user manual
o The user manual provides a complete description of the
ROCKY-4786EVG CPU board, installation instructions and
configuration options.
Wear an electrostatic discharge cuff (ESD)
o Electronic components are easily damaged by ESD. Wearing an ESD
cuff will remove ESD from your body and help to prevent ESD
damage.
Place the CPU Card on an antistatic pad
o When you are installing or configuring the CPU Card, place it on an
antistatic pad. This will help to prevent potential ESD damage.
Turn off all power to the ROCKY-4786EVG CPU card
o When working with the CPU card, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the
system.
Before and during the installation of the ROCKY-4786EVG CPU Board DO NOT:
Remove any of the stickers on the PCB board. These stickers are
To Next Page
Loading...
Need help?
General
