1-89
ROCKY-4786EVG CPU Card
89
Boot Other Device [Enabled]
The Boot Other Device option determines whether the CPU card will use a second or third
boot device if the first boot device is not found.
Enabled
(D
EFAULT) The system will look for second and third boot devices if
the first one is not found.
Disabled
The system will not look for second and third boot device
if the first one is not found.
Swap Floppy Drive [Disabled]
The Swap Floppy Drive option is effective only in systems with two floppy drives.
Selecting Enabled assigns physical drive B to logical drive A, and physical drive A to
logical drive B.
Enabled
Assigns physical drive B to logical drive A, and physical
drive A to logical drive B.
Disabled
(D
EFAULT) Default physical/logical drive assignations.
Boot Up Floppy Seek [Enabled]
During the POST, BIOS will determine if the floppy disk drive installed has 40 or 80 tracks.
360K FDDs have 40 tracks while 760K, 1.2M and 1.44M FDDs all have 80 tracks
Enabled
(D
EFAULT) BIOS searches for a FDD to determine if it has 40 or 80
tracks. Note that BIOS cannot tell the difference between
720K, 1.2M or 1.44M drives as they all have 80 tracks.
Disabled
BIOS does not search for the type of FDD drive by track
number. Note that there will not be any warning message
if the drive installed is 360K.