1-85
ROCKY-4786EVG CPU Card
85
Manual
Selecting this option allows you to manually configure
the device on the IDE channel in BIOS.
Access Mode [Auto]
The Access Mode option allows you to determine the hard disk BIOS translation modes.
Most systems now use hard drives with large capacities and therefore either the LBA
translation mode or auto mode should be selected.
CHS
Select this mode if the HDD capacity is less than
504MB.
LBA
Select this mode if the HDD capacity is more than
8.4GB.
Large
This mode is an extended ECHS mode and while it
supports HDDs larger than 504MB, it is not
recommended.
Auto
(D
EFAULT) If you are unsure of what access mode to set, select this
option
Capacity
The Capacity specification tells the user the storage capacity of the HDD installed in the
system.
Cylinder
The Cylinder specification shows the number of cylinders (tracks) on the HDD installed in
the system.
Head
The Head specification shows the number of logical heads on the HDD installed in the
system.
To Next Page
Loading...
Need help?
General
