WAFER-LX Motherboard
Page 94
Î Memory Frequency [333 MHz]
Use the Memory Frequency option to set the frequency of the installed DRAM modules.
The Memory Frequency options are:
200 MHz
266 MHz
333 MHz (Default)
400 MHz
Î Video Memory Size [8M]
Use the Video Memory Size option to determine how much memory is allocated to the
video graphics device. The Video Memory Size options are:
None
8M (Default)
16M
32M
64M
128M
254M
Î Output Display [Panel & CRT]
Use the Output Display configuration to specify the display devices the system is
connected to. The Output Display options are:
Flat Panel
CRT
Panel & CRT (Default)
Î Flat Panel Configuration [Press Enter]
Use the Flat Panel Configuration option to open the Flat Panel Configuration menu. The
Flat Panel Configuration options are shown in Section
.
To Next Page
Loading...
Need help?
General
