WAFER-LX Motherboard
Page 80
PC Health Status: Monitors essential system parameters.
The following user configurable options are also available in
BIOS Menu 1:
Î Load Fail-Safe Defaults
Use the Load Fail-Safe Defaults option to load failsafe default values for each BIOS
parameter in the setup menus. Press F6 for this operation on any page.
Î Load Optimized Defaults
Use the Load Optimized Defaults option to load optimal default values for each BIOS
parameter in the setup menus. Press F7 for this operation on any page.
Î Set Supervisor Password
Use the Set Supervisor Password option to set the supervisor password. By default, no
supervisor password is set. To install a supervisor password, select this field and enter the
password. After this option is selected, a red dialogue box appears with “Enter
Password: ”. Type the password and press E
NTER. Retype the original password into the
“Confirm Password: ” dialogue box and press E
NTER. To disable the password, simply
press E
NTER in the “Enter Password: ” dialogue box, then press any key in the
“Password Disabled !!!” dialogue box.
Î Set User Password
Use the Set User Password option to set the user password. By default no user
password is set. To install a user password, select this field and enter the password. After
this option is selected, a red dialogue box appears with “Enter Password: ”. Type the
password and press E
NTER. Retype the original password into the “Confirm Password: ”
dialogue box and press E
NTER. To disable the password, simply press ENTER in the “Enter
Password: ” dialogue box, then press any key in the “Password Disabled !!!” dialogue
box.
Î Save & Exit Setup
Use the Save & Exit Setup option to save any configuration changes made and exit the
BIOS menus.
To Next Page
Loading...
Need help?
General
