11
PosPRO till
Preparation
Installing and configuring a PosPRO cash register or till for first time use is a task that can only be executed by an Inepro
Certified Engineer, ask the vendor for such an engineer when adding or removing such machines to or from the system.
Make sure that the required data such as the IP address (or IP-range) of this PosPRO till and the address of the server
are known by Inepro.
Make sure that a network and power outlet are available at the location of the till.
On site
Connect the PosPRO till to a power outlet and the network cable to a network outlet.
To Next Page
Loading...