10 - Inepro Back Office Suite
Hardware Installation
Vending machines
Preparation
Before a vending machine can be used in the system an Inepro terminal must be installed.
Installing a terminal in a vending machine is a task that can only be executed by an Inepro Certified Engineer, ask the
vendor for such an engineer when adding or removing vending machines to or from the system.
Make sure that the required data such as the IP address (or IP-range) of this terminal and the address of the server are
known by Inepro.
Make sure that a network and power outlet are available at the location of the vending machine. The terminal is
powered by the vending machine and does not require an additional power outlet.
Soup / Coffee / Orange juice machines and machines alike are also considered vending machines!
On site
Connect the vending machine to a power outlet and the network cable to a network outlet.
To Next Page
Loading...