Inficon Cygnus 2 User Manual

3 - 4
Cygnus 2 Operating Manual
8 Sensor Connectors - Channels 5 and 6 (optional)
Expansion panel to accommodate the optional addition of two more sensors,
Sensors 5 and 6.
9 Not used
10 TCP/IP Connector (Optional)
Provides connections for TCP/IP interface.
RS-232C Remote Communication Connector (standard)
Provides a 9-pin RS-232C communications port.
11 For future expansion options
12 6-Channel DAC (optional)
Provides recorder output for six channels (15 pin miniature D-sub connector).
Outputs are programmable for recorder function.
13 Fan Outlet
Exhaust opening for the Cygnus 2’s miniature fan; Do not block!
14 24-Volt Supply (standard)
Provides three 24 V (dc) supplies rated at 1.75 Amps. See Table 2-5 on page
2-12.
15 6-Channel DAC (standard)
Provides Source control voltage or recorder output for 6 channels (BNC
connectors). Outputs are programmable for Source Control or Recorder
Voltage.

Inficon Cygnus 2 Specifications

General

Technology	Quartz Crystal Microbalance (QCM)
Number of Sensors	Up to 6
Power Requirements	100-240 VAC, 50/60 Hz
Communication Interface	Ethernet, RS-232, USB
Power Supply	100-240 VAC, 50/60 Hz
Thickness Range	0.1 Å to 999, 999 Å
I/O Interfaces	Ethernet, RS-232, USB
Measurement Principle	Quartz Crystal Microbalance
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C
Deposition Rate Range	0.001 to 999.9 Å/s (0.0001 to 99.99 nm/s)