A CPU-controlled sensor conditioner in the load weigh-
ing system allows calibration and balance procedures to
be performed automatically, after you initiate them at
the front panel. The sensor conditioner provides both an
unranged analog and an automatically ranged digital
load signal output suitable for several types of optional
readout devices.
Optional readouts for test results include interfacing for
an X-Y recorder, a strip chart recorder, and an 80 charac-
ter-width printer.
The console also has provisions for an IEEE-488 inter-
face. This is a General Purpose Instrument Bus (GPIB)
which allows remote supervisory control of test proce-
dures through a programmable computer.
General Characteristics M10-94400-1
1-6
To Next Page
Loading...
Need help?
General
