SECTION
12
CUSA EXcel Ultrasonic Surgical Aspirator System Service Manual 12-1
12Calibration
In this section:
• Tools/equipment needed for calibrations
• DC bias power supply
• Suction pump
• Motor for the cooling water pump.
For Your Information
In the CUSA EXcel system, several components may require calibration. This
section describes how to do the calibrations.
In most cases, you need to calibrate a component only when you replace it. These
procedures stand alone; that is, you can use one without reference to others.
Warning
High Current Hazard Do not touch the ultrasonics PCB heat sink while the
CUSA EXcel system is energized. The heat sink is isolated from ground, and can deliver
very high current, resulting in injury.
To Next Page
Loading...
Need help?
General
