Integra Service Center
Repair Policy
CUSA EXcel Ultrasonic Surgical Aspirator System Service Manual 13-9
Returning the Handpiece
Clean, disinfect, and sterilize the handpiece before you package it for shipping.
Package the handpiece and handpiece cable in a way that will protect the
handpiece and handpiece cable connector from damage.
Package each handpiece in a separate packaging container.
Returning Circuit Boards
When packaging circuit boards use the following guidelines:
• Whenever possible, use the same packing materials in which you received the
circuit board.
• Place each circuit board or subassembly in an electrostatic discharge (ESD)
bag or container.
• Provide a separate packing container for each circuit board.
• When returning a subassembly with electrical components, use at least four
inches of tightly packed, industry approved, shock absorbing, ESD packing
material on all sides, including the bottom.
Ordering Replacement Parts
When ordering replacement parts for the console, include this information:
• Model number (located on the label on the CUSA system rear panel)
• Serial number (located on the label on the CUSA system rear panel)
• Part number (Refer to the Replacement Parts section in this manual).
When ordering replacement parts for the handpiece, include the serial number
(located on the handpiece connector).
Integra Service Center
Integra NeuroSciences
5965 Pacific Center Blvd.
Suite 714
San Diego, CA 92121
Ph: 858-455-1115
Fax: 858-455-8298
E-mail: camts@integra-ls.com
To Next Page
Loading...
Need help?
General
