EasyManuals Logo

Intel S2600CP Family User Manual

Intel S2600CP Family
223 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
Intel® Server Board S2600CP and Server System P4000CP TPS
Intel® Server Board S2600CP and Intel® Server System P4000CP Platform Management
Revision 1.1
Intel order number G26942-003
57
6. Intel
®
Server Board S2600CP and Intel
®
Server
System P4000CP Platform Management
6.1 Server Management Function Architecture
6.1.1 Feature Support
6.1.1.1 IPMI 2.0 Features
The IPMI 2.0 features are as follows:
Baseboard management controller (BMC)
IPMI Watchdog timer
Messaging support, including command bridging and user/session support
Chassis device functionality, including power/reset control and BIOS boot flags support
Event receiver device: The BMC receives and processes events from other platform
subsystems.
Field Replaceable Unit (FRU) inventory device functionality: The BMC supports access
to system FRU devices using IPMI FRU commands.
System Event Log (SEL) device functionality: The BMC supports and provides access
to a SEL.
Sensor Data Record (SDR) repository device functionality: The BMC supports storage
and access of system SDRs.
Sensor device and sensor scanning/monitoring: The BMC provides IPMI management
of sensors. It polls sensors to monitor and report system health.
IPMI interfaces
Host interfaces include system management software (SMS) with receive message
queue support, and server management mode (SMM)
IPMB interface
LAN interface that supports the IPMI-over-LAN protocol Remote Management Control
Protocol (RMCP, RMCP+)
Serial-over-LAN (SOL)
ACPI state synchronization: The BMC tracks ACPI state changes that are provided by
the BIOS.
BMC Self Test: The BMC performs initialization and run-time self-tests and makes
results available to external entities.
See also the Intelligent Platform Management Interface Specification Second Generation, v2.0.
6.1.1.2 Non IPMI features
The BMC supports the following non-IPMI features. This list does not preclude support for future
enhancements or additions.
In-circuit BMC firmware update
Fault resilient booting (FRB): FRB2 is supported by the watchdog timer functionality.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel S2600CP Family and is the answer not in the manual?

Intel S2600CP Family Specifications

General IconGeneral
CPU Socket TypeLGA 2011
Max CPU Count2
ChipsetIntel C602
Memory Slots16
Processor SupportIntel Xeon E5-2600/E5-2600 v2 series
Memory SupportDDR3
Network InterfaceGigabit Ethernet
Storage Controller6 x SATA 3Gb/s, 2 x SATA 6Gb/s
RAID SupportRAID 0, 1, 5, 10
Form FactorSSI EEB
USB Ports2 USB 3.0

Related product manuals