Intel S3200SHV - Entry Server Board Motherboard User Manual

Connectors and Jumper Blocks Intel® Server Boards S3200SH/S3210SH TPS
Revision 1.8 93
Intel Order Number: E14960-009
Figure 36. Intel
®
Server Board S3200SHV Back Panel I/O Connectors
6.7.2 Chassis Intrusion Header
A 1x2 pin header (J1B2) is used in chassis that support a chassis intrusion switch. The Intel
®
ICH9R monitors this header. Table 62 shows the pin-out definition for this header.
Table 62. Chassis Intrusion Header (J1B2) Pin-out
Pin Signal Name
1 FP_INTRUDER_HDR_P1
2 FP_INTRUDER_HDR_N
6.7.3 HDD Active LED Header
There is a 1x2 pin header for HDD LED connection. This jumper is reserved for PCI add-in
cards that support the SCSI or SATA interface with an external HDD LED activity cable.
Table 63. HDD LED Header (J1J1) Pin-out
Pin Signal Name
1 FM_SIO_SCSI_ACT_N
2 TP_SCSI_ACT_PIN2
6.7.4 IPMB
There is a 4-pin IPMB connector jumper. This jumper is reserved for connecting an add-in
server management module.
6.7.5 HSBP
There is a 4-pin HSBP connector jumper. This jumper is reserved for connecting to the Intel
®
Entry Server Chassis SC5299-E hot-swap backplane.
Keyboard
LAN
POST Code LED
VGA USBMouse
Serial A

Intel S3200SHV - Entry Server Board Motherboard Specifications

General

Brand	Intel
Model	S3200SHV - Entry Server Board Motherboard
Category	Motherboard
Language	English