System BIOS Intel® Server Boards S3200SH/S3210SH TPS
Revision 1.8 61
Intel Order Number: E14960-009
Main Advanced Security Server Management Boot Options Boot Manager
Administrator Password Status <Installed/Not Installed>
User Password Status <Installed/Not Installed>
Set Administrator Password [1234abcd]
Set User Password [1234abcd]
Front Panel Lockout
Enabled/Disabled
Figure 21. Setup Utility — Security Configuration Screen Display
Table 28. Setup Utility — Security Configuration Screen Fields
Setup Item Options Help Text Comments
Administrator Password
Status
<Installed
Not Installed>
Information only. Indicates
the status of the
administrator password.
User Password Status <Installed
Not Installed>
Information only. Indicates
the status of the user
password.
Set Administrator
Password
[123abcd] Administrator password is used to
control change access in BIOS Setup
Utility.
Only alphanumeric characters can be
used. Maximum length is 7 characters. It
is not case sensitive.
Note: Administrator password must be
set in order to use the user account.
This option only controls
access to setup.
Administrator has full
access to all setup items.
Clearing the Admin
password also clears the
user password.
Set User Password [123abcd] User password is used to control entry
access to BIOS Setup Utility.
Only alphanumeric characters can be
used. Maximum length is 7 characters. It
is not case sensitive.
Note: Removing the administrator
password will also automatically remove
the user password.
Available only if the
Administrator Password is
installed. This option only
protects setup. User
password only has limited
access to setup items.
Front Panel Lockout Enabled
Disabled
Locks the power button and reset button
on the system's front panel. If [Enabled]
is selected, power and reset must be
controlled via a system management
interface.
To Next Page
Loading...
Need help?
General
