System BIOS Intel® Server Boards S3200SH/S3210SH TPS
Revision 1.8 73
Intel Order Number: E14960-009
Table 39. Setup Utility — Error Manager Screen Fields
Setup Item Options Help Text Comments
Displays System Errors
Information only. Displays errors that
occurred during this POST.
4.3.2.9 Exit Screen
The Exit screen allows the user to choose to save or discard the configuration changes made
on the other screens. It also provides a method to restore the server to the factory defaults or to
save or restore a set of user-defined default values. If Restore Defaults is selected, the default
settings, noted in bold in the tables in this chapter, are applied. If Restore User Default Values is
selected, the system is restored to the default values the user saved earlier, instead of being
restored to the factory defaults.
Error Manager Exit
Save Changes and Exit
Discard Changes and Exit
Save Changes
Discard Changes
Load Default Values
Save as User Default Values
Load User Default Values
Figure 33. Setup Utility — Exit Screen Display
Table 40. Setup Utility — Exit Screen Fields
Setup Item Help Text Comments
Save Changes and Exit Exit BIOS Setup Utility after saving changes.
The system will reboot if required.
The [F10] key can also be used.
Prompts user for confirmation only if
any of the setup fields were modified.
Discard Changes and
Exit
Exit BIOS Setup Utility without saving changes.
The [Esc] key can also be used.
Prompts user for confirmation only if
any of the setup fields were modified.
Save Changes Save changes without exiting BIOS Setup
Utility.
Note: Saved changes may require a system
reboot before taking effect.
Prompts user for confirmation only if
any of the setup fields were modified.
Discard Changes Discard changes made since the last save
changes operation was performed.
Prompts user for confirmation only if
any of the setup fields were modified.
To Next Page
Loading...
Need help?
General
