Intermec PC43t - Page 157

Appendix B — Default Settings
PC23 and PC43 Desktop Printer User Manual 143
Printhead
Lifted
Enable 1 Occurrences Error - Printhead lifted
Printhead Not
Detected
Disable 1 Occurrences Error - Printhead not
detected
Information Alert Default Settings
Information Alert Status
Delay
Repeat
Delay Unit Message
Print Job Complete Disable 1 Occurrences Print job complete
Started Disable 1 Occurrences Printer is started
Printer is rebooting Disable 1 Occurrences Printer is rebooting
Warning Alert Default Settings
Warning Alert Status
Delay
Repeat
Delay Unit Message
Ribbon
Installed
Disable 1 Occurrences Warning - Ribbon
installed
Upgrading
Firmware
Disable 1 Occurrences Warning - Upgrading
firmware
Odometer
(User
Resettable)
Disable 1 Occurrences Warning - Odometer (User
resettable) has reached a
preset value.
Odometer
(Printer)
Disable 1 Occurrences Warning - Odometer
(Printer) has reached a
preset value.
Replace
Printhead
Disable 1 Occurrences Warning - Replace
printhead
Clean
Printhead
Disable 1 Occurrences Warning - Clean printhead
Faulty Dot Disable 1 Occurrences Warning - Faulty dot is
detected
Error Alert Default Settings (Continued)
Error Alert Status
Delay
Repeat Delay Unit Message