EasyManuals Logo

Intermec PC43t User Manual

Intermec PC43t
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
Chapter 1 — About the Printers
PC23 and PC43 Desktop Printer User Manual 19
About ZSim
ZSim (ZPL command language simulator) interprets Zebra™
programs (ZPL II or later) without requiring any host programming
changes. If you are sending ZPL label files to the printer, select ZSim as
your printer command language. For more information, see the ZSim
Command Reference Manual.
About DSim
DSim (DPL command language simulator) interprets Datamax™ data
streams without requiring any host programming changes. If you are
sending DPL label files to the printer, select DSim as your printer
command language. For more information, see the DSim Command
Reference Manual.
About Smart Printing
Smart Printing refers to the ability of the printer to independently run
printing operations without being connected to a host computer. If
you are running printer-based applications written in C#, select Smart
Printing as your printer command language.
For help creating Smart Print applications, go to the Intermec
Developer Center at www.intermec.com/developer.
About ESim/ZSim Auto-Configuration
Use the ESim/ZSim auto-configuration feature when you are
replacing another printer whose command language is unknown.
When the printer command language is set to ESim/ZSim, on its first
run the printer automatically calibrates the media, identifies the
command language of the first incoming print job, configures the
printer for the appropriate language (ESim or ZSim), and prints the
label.
The data stream must be at least 10 bytes long. Command language
identification is activated after a 2-second timeout, or when the data
buffer is full (1 MB).
Note: Load media before you turn the printer on, since the printer
automatically calibrates the media when it starts in ESim/ZSim
auto-configuration mode.

Table of Contents

Other manuals for Intermec PC43t

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intermec PC43t and is the answer not in the manual?

Intermec PC43t Specifications

General IconGeneral
ColorNo
Print technologyThermal transfer
Maximum resolution203 x 203 DPI
Maximum print height- mm
Maximum printing width106 mm
Internal memory128 MB
Built-in barcodesAZTECCODE, Code 49, Data Matrix, EAN128, EAN13, EAN8, MaxiCode, MicroPDF417, PDF417, POSTNET, QR Code
Page description languagesIPL, XML, ZPL
DisplayLCD
Product colorBlack
Display resolution480 x 234 pixels
Wi-Fi-
USB portYes
Optional connectivityBluetooth, Ethernet, Wireless LAN
USB 2.0 ports quantity1
Connectivity technologyWired & Wireless
Maximum label width118 mm
Maximum label length1.727 m
Maximum roll diameter127 mm
Input current1.5 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Sustainability certificatesENERGY STAR
Operating temperature (T-T)5 - 40 °C
Storage relative humidity (H-H)10 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth281 mm
Width210 mm
Height182 mm
Weight2700 g

Related product manuals