ISHIDA UNI-7 Service Manual

TABLE OF CONTENTS
5.6.7 MOTOR UNIT............................................................................................ 5-37
Chapter 6 MECHANICAL ADJUSTMENT
6.1 FOUR CORNER LIMIT SPACE...................................................................... 6-1
6.2 CASSETTE MAGNET POSITION................................................................... 6-2
6.3 GEAR ENGAGEMENT ................................................................................... 6-3
6.4 SUPPORT ROLLER ....................................................................................... 6-4
6.5 PRINT POSITION............................................................................................ 6-5
6.6 THERMAL HEAD POSITION.......................................................................... 6-6
Chapter 7 SETUP MODE
7.1 ENTERING SETUP MODE ............................................................................. 7-1
7.2 CASSETTE SETTING..................................................................................... 7-3
7.3 LABEL SETTING.......................................................................................... 7-10
7.4 LABEL FORMAT SETTING.......................................................................... 7-11
7.5 BARCODE SETTING.................................................................................... 7-13
7.5 CUSTOM BARCODE SETTING ................................................................... 7-17
7.6 MENU TILTLE EDITING ............................................................................... 7-21
7.7 OPERATION SETTING................................................................................. 7-27
7.8 ERROR PROCESS SETTING ...................................................................... 7-29
7.9 ERROR LOG DISPLAY ................................................................................ 7-31
7.10 TRACEABILITY SETTING............................................................................ 7-32
7.11 DUAL CURRENCY SETTING....................................................................... 7-33
7.12 PRICE DOUNDING SETTING ...................................................................... 7-34
7.12 COUNTRY SETTING .................................................................................... 7-35
7.13 FILE SAVE / LOAD....................................................................................... 7-36
Chapter 8 ADJUSTMENT MODE
8.1 ADJUSTMENT MODE ENTRY....................................................................... 8-1
8.2 KEY CHECK ................................................................................................... 8-3
8.3 PROGRAM NUMBER..................................................................................... 8-5
8.4 MEMORY CLEAR........................................................................................... 8-6
8.5 PRINTER ADJUSTMENT ............................................................................... 8-8
8.6 CALIBRATION.............................................................................................. 8-16
8.7 DOWNLOADING........................................................................................... 8-19
8.8 OPTION CHECK........................................................................................... 8-23
8.9 DISPLAY CAPTURE..................................................................................... 8-25
8.10 MODEL SETTING......................................................................................... 8-26
Chapter 9 ERROR SCREENS
viii UNI-7 Service Manual

ISHIDA UNI-7 Specifications

General

Use conditions	Temperature: -5 to 35°C Humidity: 30 to 85%, Non condensing.
Power supply:	AC100 – 240V, 50 / 60Hz
Power consumption	1.0A/0.5A
Weighing capacity Scale interval	15 kg: 0 to 6/0.002 kg, 6 to 15/0.005 kg 30 lb: 0 to 15/0.005 lb, 15 to 30/0.01 lb
Weighting accuracy	1/3000
Printing method	Direct thermal method
Printing speed	100mm/second, 120mm/second Note: The printing speed may vary according to label conditions.
Printing effective size	56mm
Label size	Label width: 30mm to 60mm Label length: 20mm to 150mm
Operator/Customer display	7.0 inch color liquid crystal with back light, 480 X 234dots
Thermal head	2 inches (448dots) and 8 dots/mm
Number of label cassettes	7 cassettes
Program store medium	Flash ROM (32M bytes)
Input/Output	LAN 1 channel USB 1 channel CF 1 channel Drawer 2 channels