ISHIDA UNI-7 Service Manual

TABLE OF CONTENTS
TABLE OF CONTENTS
Chapter 1 BASIC INFORMATION
1.1 OUTER DIMENSIONS FOR EACH TYPE...................................................... 1-1
1.1.1 OUTER DIMENSIONS FOR BENCH TYPE ................................................ 1-1
1.1.2 OUTER DIMENSIONS FOR POLE TYPE ................................................... 1-2
1.1.3 OUTER DIMENSIONS FOR BAKERY TYPE ..............................................1-3
1.1.4 OUTER DIMENSIONS FOR SELF-SERVICE TYPE................................... 1-4
1.1.5 OUTER DIMENSIONS FOR ELEVATED TYPE.......................................... 1-5
1.1.6 OUTER DIMENSIONS FOR HANGING TYPE............................................ 1-6
1.2 SPECIFICATIONS .......................................................................................... 1-7
1.3 INSTALLATION .............................................................................................. 1-8
1.3.1 POWER SUPPLY........................................................................................ 1-8
1.3.2 PRECAUTIONS FOR INSTALLATION........................................................ 1-9
Chapter 2 ASSEMBLY DRAWINGS
2.1 BENCH TYPE ................................................................................................. 2-1
2.2 POLE TYPE .................................................................................................... 2-3
2.3 BAKERY TYPE............................................................................................... 2-5
2.4 SELF-SERVICE TYPE.................................................................................... 2-7
2.5 ELEVATED SINGLE PRINTER TYPE............................................................ 2-8
2.6 ELEVATED DUAL PRINTER TYPE ............................................................. 2-10
Chapter 3 BLOCK DIAGRAMS
3.1 BLOCK DIAGRAM (BENCH/POLE TYPE) .................................................... 3-1
3.2 BLOCK DIAGRAM (BAKERY TYPE)............................................................. 3-2
3.3 BLOCK DIAGRAM (SELF-SERVICE TYPE).................................................. 3-3
3.4 BLOCK DIAGRAM (HANGING TYPE)........................................................... 3-4
3.5 BLOCK DIAGRAM (ELEVATED TYPE)......................................................... 3-5
Chapter 4 ELECTRICAL SIGNALS
4.1 MAIN BOARD (PK-260).................................................................................. 4-1
4.2 KEY/LCD BOARD (PK-261)........................................................................... 4-7
4.3 LCD BOARD (PK-263) ................................................................................... 4-9
4.4 WIRELESS LAN BOARD (PK-265).............................................................. 4-10
4.5 SELF-SERVICE MASTER BOARD (PK-266) .............................................. 4-11
4.6 SELF-SERVICE MASTER BOARD (PK-267) .............................................. 4-12
4.7 THERMAL BOARD (PK-268) ....................................................................... 4-13
vi UNI-7 Service Manual

ISHIDA UNI-7 Specifications

General

Use conditions	Temperature: -5 to 35°C Humidity: 30 to 85%, Non condensing.
Power supply:	AC100 – 240V, 50 / 60Hz
Power consumption	1.0A/0.5A
Weighing capacity Scale interval	15 kg: 0 to 6/0.002 kg, 6 to 15/0.005 kg 30 lb: 0 to 15/0.005 lb, 15 to 30/0.01 lb
Weighting accuracy	1/3000
Printing method	Direct thermal method
Printing speed	100mm/second, 120mm/second Note: The printing speed may vary according to label conditions.
Printing effective size	56mm
Label size	Label width: 30mm to 60mm Label length: 20mm to 150mm
Operator/Customer display	7.0 inch color liquid crystal with back light, 480 X 234dots
Thermal head	2 inches (448dots) and 8 dots/mm
Number of label cassettes	7 cassettes
Program store medium	Flash ROM (32M bytes)
Input/Output	LAN 1 channel USB 1 channel CF 1 channel Drawer 2 channels