ISHIDA UNI-7 Service Manual

Chapter 9 ERROR SCREENS
213 FREE2 MASTER ISN'T REGISTERED
FREE2 No. [*] ISN'T PROGRAMMED
DELETE IT?
214 FREE3 MASTER ISN'T REGISTERED
FREE3 No. [*] ISN'T PROGRAMMED
DELETE IT?
215 FREE4 MASTER ISN'T REGISTERED
FREE4 No. [*] ISN'T PROGRAMMED
DELETE IT?
216 FREE5 MASTER ISN'T REGISTERED
FREE5 No. [*] ISN'T PROGRAMMED
DELETE IT?
219
STORE MASTER IS NOT
PROGRAMMED
STORE No. [*] IS NOT PROGRAMMED
CHECK STORE No.
221 TARE LIMIT OVER (MAX 5998g)
RE-PROGRAM TARE WEIGHT.
IF YOU RELEASE ERROR
222
TARE WEIGHT IS 0g SET TARE WEIGHT
223
COMMENT MASTER IS NOT
PROGRAMMED
COMMENT No. [*] IS NOT PROGRAMMED
DELETE IT?
224
LABEL SETTING MASTER IS NOT
PROGRAMMED
LABEL No. [*] IS NOT PROGRAMMED
WANT TO PROGRAM AS DEFAULT?
229
FILE SYSTEM IS ABNORMAL CHECK FILE CONTENTS
259
CALORY MASTER IS NOT
PROGRAMMED
CAROLY No. [*] IS NOT PROGRAMMED
DELETE IT?
266-
000
FILE INPUT ERROR THERE IS FILE THAT FAILED IN INPUT.
266-
001
FILE INPUT ERROR FAILED IN RECONSTRUCTION OF SRAM DATA
267-
000
FILE OUTPUT ERROR THERE IS FILE THAT IS FAILED IN OUTPUT.
267-
001
FILE OUTPUT ERROR FAILED IN SRAM DATA BACK UP
268-
000
FILE DELETE ERROR THERE IS MASTER THAT FALIED IN DELETING.
268-
001
FILE DELETE ERROR FAILED IN SRAM DATA DELETE
268-
002
FILE DELETE ERROR IT FAILED IN DATA DELETE.
268-
003
FILE DELETE ERROR THERE IS DATA THAT FAILED IN DELETING.
271 INITIALIZE ERROR
THERE IS MASTER THAT FAILED IN
INITIALIZATION
273 ABNORMAL
THERE IS ISSUE THAT HAS DIGNOSYS
RESULT AS ABNORMAL.
274-
000
ABNORMAL
THERE IS ISSUE THAT HAS DIGNOSIYS
RESULT AS ABNORMAL.
274-
001
ABNORMAL
IT CANCELED TOTAL DIGNOSYS PROCESS
WITH FOLLOWING REASON.
- IT FAILED IN DIGYNOSYS START PROCESS
274-
002
ABNORMAL
IT CANCELED TOTAL DIGNOSYS PROCESS
WITH FOLLOWING REASON.
- IT FAILED IN GETTING IT.
9-2 UNI-7 Service Manual

ISHIDA UNI-7 Specifications

General

Use conditions	Temperature: -5 to 35°C Humidity: 30 to 85%, Non condensing.
Power supply:	AC100 – 240V, 50 / 60Hz
Power consumption	1.0A/0.5A
Weighing capacity Scale interval	15 kg: 0 to 6/0.002 kg, 6 to 15/0.005 kg 30 lb: 0 to 15/0.005 lb, 15 to 30/0.01 lb
Weighting accuracy	1/3000
Printing method	Direct thermal method
Printing speed	100mm/second, 120mm/second Note: The printing speed may vary according to label conditions.
Printing effective size	56mm
Label size	Label width: 30mm to 60mm Label length: 20mm to 150mm
Operator/Customer display	7.0 inch color liquid crystal with back light, 480 X 234dots
Thermal head	2 inches (448dots) and 8 dots/mm
Number of label cassettes	7 cassettes
Program store medium	Flash ROM (32M bytes)
Input/Output	LAN 1 channel USB 1 channel CF 1 channel Drawer 2 channels