ITech IT8000 Series

SENSe Subsystem
11 SENSe Subsystem
Sense commands control the measurement ranges and window as well as the
data acquisition sequence.
[SOURce:]REMote:SENSe[:STATe] <Bool>
This command is used to set the on/off state of the Sense function.
• 0|OFF: Turn off
• 1|ON: Turn on
Group
SENSe
Syntax
[SOURce:]REMote:SENSe[:STATe] <Bool>
Arguments
<Bool>
0|OFF|1|ON
Default Value
0|OFF
Example
REM:SENS 1
Query Syntax
[SOURce:]REMote:SENSe[:STATe]?
Returns
<Bool>
0|OFF|1|ON
Copyright © Itech Electronic Co., Ltd.
118