ITech IT8000 Series Programming Guide

STATus Subsystem
Returns
<bit value>
Example
STATus:QUEStionable[:EVENt]?
Also see
None
STATus:QUEStionable:ENABle <NR1>
Sets the value of the enable register for the Questionable Status group. The en-
able register is a mask for enabling specific bits from the Operation Event regis-
ter to set the QUES (questionable summary) bit of the Status Byte register.
STATus:PRESet clears all bits in the enable register. *CLS does not clear the
enable register, but does clear the event register.
Group
STATus
Syntax
STATus:QUEStionable:ENABle <NR1>
Arguments
<NR1>
A decimal value corresponding to the binary weighted sum of the register's bits.
Setting range: 0 to 65535.
Default Value
0
Example
Enable bit 2 and 4 in the questionable enable register: STATus:QUEStionable:
ENABle 24
Copyright © Itech Electronic Co., Ltd.
77

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English