ITech IT8000 Series Programming Guide

SYSTem Subsystem
2 SYSTem Subsystem
SYSTem:POSetup <CPD>
This command is used to set some parameter settings or working status when
the instrument is powered on.
• RST: The parameter setting or status when the instrument is powered on is
equivalent to executing the *RST command.
For details, see *RST.
• SAV0: The parameter setting or status when the instrument is powered on is
equivalent to executing the *SAV 0 command.
For details, see *SAV <NR1>.
Group
System
Syntax
SYSTem:POSetup <CPD>
Arguments
<CPD>
RST|SAV0
Default Value
RST
Returns
None
Example
SYST:POS SAV0
Copyright © Itech Electronic Co., Ltd.
12

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English