ITech IT8000 Series

SOURce Subsystem
Example
VOLT:SLEW:NEG 1
Query Syntax
[SOURce:]VOLTage:SLEW:NEGative?
Returns
<NRf+>
12.15 [SOURce:]VOLTage:ON[:LEVel] <NRf+>
This command is used to set the start load voltage of the load.
Group
SOURce
Syntax
[SOURce:]VOLTage:ON[:LEVel] <NRf+>
Arguments
<NRf+>
MINimum|MAXimum|DEFault|<value>
Setting range: MIN to MAX
Default Value
MAXimum
Example
VOLT:ON 50
Query Syntax
[SOURce:]VOLTage:ON[:LEVel]?
Copyright © Itech Electronic Co., Ltd.
134