TRIGger Subsystem
Group
TRIGger
Syntax
TRIGger:ACQuire:CURRent:SLOPe <CPD>
Arguments
<CPD>
POSitive|NEGative|EITHer
Default Value
POSitive
Example
TRIGger:ACQuire:CURRent:SLOPe NEGative
Query Syntax
TRIGger:ACQuire:CURRent:SLOPe?
Returns
<CRD>
POSitive|NEGative|EITHer
TRIGger:ACQuire:CURRent[:LEVel] <NRf+>
This command is used to set the current trigger threshold of the Meter.
Group
TRIGger
Syntax
TRIGger:ACQuire:CURRent[:LEVel] <NRf+>
Copyright © Itech Electronic Co., Ltd.
68
To Next Page
Loading...
