TRIGger Subsystem
TRIGger:ARB:SOURce <CPD>
This command is used to set the trigger source for the ARB subsystem function.
• EXTernal: External triggering, that is, when pin 4 of the digital I/O interface
receives a fixed pulse signal, it triggers the ARB subsystem function.
Before using the external trigger, you need to configure the relevant pa-
rameters of pin 4. For details, please refer to the instruction of the CON-
Figurable subsystem.
• BUS: Triggered by the command (*TRG).
• MANual: Manual triggering, that is, the ARB subsystem function is triggered
by the combination keys [Shift]+[On/Off] (Trigger).
Group
TRIGger
Syntax
TRIGger:ARB:SOURce <CPD>
Arguments
<CPD>
EXTernal|BUS|MANual
Default Value
MANual
Example
TRIGger:ARB:SOURce EXTernal
Query Syntax
TRIGger:ARB:SOURce?
Returns
<CRD>
EXTernal|BUS|MANual
Copyright © Itech Electronic Co., Ltd.
72
To Next Page
Loading...
