ITech IT8000 Series

CONFigurable Subsystem
Syntax
[CONFigurable:]IO:PWM:DUTY <NRL>, <NR1>
Arguments
<NRL>, <NR1>
0 to 6, 1 to 100
Default Value
0, 0
Returns
None
Example
Set the PWM duty cycle of the pin 1 to 10%: IO:PWM:DUTY 0, 10
Also see
[CONFigurable:]IO:PWM:DUTY? <NRL>
[CONFigurable:]IO:PWM:DUTY? <NRL>
This command is used to query the PWM duty cycle of the specified pin.
Group
CONFigurable
Syntax
[CONFigurable:]IO:PWM:DUTY? <NRL>
Arguments
<NRL>
0 to 6
Copyright © Itech Electronic Co., Ltd.
49