ITech IT8000 Series - Source:]Power:slew:negative <Nrf

SOURce Subsystem
Example
POW:SLEW:POS 1
Query Syntax
[SOURce:]POWer:SLEW:POSitive?
Returns
<NRf+>
12.27 [SOURce:]POWer:SLEW:NEGative <NRf+>
This command is used to set the power fall time.
Group
SOURce
Syntax
[SOURce:]POWer:SLEW:NEGative <NRf+>
Arguments
<NRf+>
MINimum|MAXimum|DEFault|<value>
Setting range: MIN~MAX
Default Value
None
Example
POW:SLEW:NEG 1
Query Syntax
[SOURce:]POWer:SLEW:NEGative?
Copyright © Itech Electronic Co., Ltd.
144