ITech IT8000 Series Programming Guide

SOURce Subsystem
Returns
<NRf+>
12.5 [SOURce:]CURRent:SLEW[:BOTH] <NRf+>
This command is used to set the current rise and fall time, that is, the two times
are set at the same time and take effect at the same time.
Group
SOURce
Syntax
[SOURce:]CURRent:SLEW[:BOTH] <NRf+>
Arguments
<NRf+>
MINimum|MAXimum|DEFault|<value>
Setting range: MIN~MAX
Default Value
None
Example
CURR:SLEW[:BOTH] 1
Query Syntax
[SOURce:]CURRent:SLEW[:BOTH]?
Returns
<NRf+>
12.6 [SOURce:]CURRent:SLEW:POSitive <NRf+>
This command is used to set the current rise time.
Copyright © Itech Electronic Co., Ltd.
126

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English