CONFigurable Subsystem
Also see
None
[CONFigurable:]IO:TRIGin:SOURce <CPD>
This command is used to set the trigger source for pin 4:
• METEr: Triggers the running of the meter function;
• DLOG: Triggers the running of the data logging function;
• LIST: Triggers the running of the list function.
Group
CONFigurable
Syntax
[CONFigurable:]IO:TRIGin:SOURce <CPD>
Arguments
<CPD>
METEr|DLOG|LIST
Default Value
METEr
Returns
None
Example
Set the trigger source of pin 4 to LIST: IO:TRIG:SOUR LIST
Also see
[CONFigurable:]IO:TRIGin:SOURce?
Copyright © Itech Electronic Co., Ltd.
56
To Next Page
Loading...
