ITech IT8000 Series

ARB Subsystem
Query Syntax
ARB:COUNt? [MIN|MAX]
Returns
<NRf+>
15.7 ARB:SAVE <NR1>
This command is used to set the save address of the ARB waveform file.
Group
ARB
Syntax
ARB:SAVE <NR1>
Arguments
<NR1>
The setting range is from 1 to 10.
Example
ARB:SAVE 2
Query Syntax
None
Returns
None
15.8 ARB:RECall <NR1>
This command is used to recall the ARB waveform file that has been saved at
an address and wait for the trigger to run.
Copyright © Itech Electronic Co., Ltd.
161