ITech IT8000 Series Programming Guide

CONFigurable Subsystem
5 CONFigurable Subsystem
Applies to digital I/O function.
[CONFigurable:]IO:SELect <NR1>
This command is used to set the pin number of the digital I/O interface. Pins 1 to
7 correspond to number 0 to 6.
Group
CONFigurable
Syntax
[CONFigurable:]IO:SELect <NR1>
Arguments
<NR1>
The setting range is from 0 to 6.
Default Value
0
Returns
None
Example
Select pin 3: IO:SEL 2
Also see
[CONFigurable:]IO:SELect?
Copyright © Itech Electronic Co., Ltd.
40

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English