ITech IT8000 Series

TRIGger Subsystem
TRIGger:ACQuire:MODE <CPD>
This command is used to set the trigger mode of the Meter function.
• AUTO: Automatic continuous triggering.
• NORMal: Non-automatic triggering, triggered once when the instrument re-
ceives a trigger signal from the trigger source.
Group
TRIGger
Syntax
TRIGger:ACQuire:MODE <CPD>
Arguments
<CPD>
AUTO|NORMal
Default Value
NORMal
Example
TRIGger:ACQuire:MODE AUTO
Query Syntax
TRIGger:ACQuire:MODE?
Returns
<CRD>
AUTO|NORMal
TRIGger:ACQuire:SOURce <CPD>
This command is used to set the trigger source for the Meter function.
Copyright © Itech Electronic Co., Ltd.
62