ITech IT8000 Series

IEEE-488 Common Commands
• Any or all conditions can be reported to the ESB bit through the enable regis-
ter. To set the enable register mask, write a decimal value to the register us-
ing *ESE.
• Once a bit is set, it remains set until cleared by this query or *CLS.
Group
None
Syntax
*ESR?
Arguments
None
Default Value
None
Returns
<NR1>
Example
*ESR?
Also see
None
*IDN?
Identification Query. Returns instrument’s identification string, which contains
four comma-separated fields. The first field is the manufacturer's name, the sec-
ond field is the instrument model number, the third field is the serial number,
and the fourth field is the firmware revision.
Group
None
Copyright © Itech Electronic Co., Ltd.
166