ITech IT8000 Series

SENSe Subsystem
SENSe:ACQuire:POINts <NRf+>
This command is used to set the number of sampling points that the Meter com-
pletes a measurement.
Group
SENSe
Syntax
SENSe:ACQuire:POINts <NRf+>
Arguments
<NRf+>
MIN|MAX|DEF|<value>
Setting range: MIN to MAX
Default Value
MIN
Example
SENSe:ACQuire:POINts 50
Query Syntax
SENSe:ACQuire:POINts? [MIN|MAX|DEF]
Returns
<NRf+>
SENSe:ACQuire:OFFSet:POINt <NRf+>
This command is used to set the number of Meter trigger offset points.
Group
SENSe
Copyright © Itech Electronic Co., Ltd.
119