ITech IT8000 Series

SYSTem Subsystem
SYSTem:DATE?
This command is used to query the date of the system clock.
Group
System
Syntax
SYSTem:DATE?
Arguments
None
Default Value
None
Returns
<SRD>
<yyyy>,<mm>,<dd>
Example
SYST:DATE?
Also see
None
SYSTem:TIME <hh>,<mm>,<ss>
This command is used to set the time of the system clock. Specify the number
of hours (0 to 23), minutes (0 to 59), and seconds (0 to 59).
The real-time clock does not adjust itself to accommodate time zone changes
or daylight saving time.
Copyright © Itech Electronic Co., Ltd.
21