CONFigurable Subsystem
Returns
<Bool>
0|OFF|1|ON
Example
IO:REV? 1
Also see
None
[CONFigurable:]IO:PWM[:ENABle] <NRL>,
<Bool>
This command is used to control whether the PWM function of the specified pin
is turned on:
• <NRL>: Used to specify the pin number. Pins 1 to 7 correspond to number 0
to 6.
• <Bool>: Used to control whether the PWM function of the specified pin is
turned on.
– 0|OFF: No
– 1|ON: Yes
Group
CONFigurable
Syntax
[CONFigurable:]IO:PWM[:ENABle] <NRL>, <Bool>
Arguments
<NRL>, <Bool>
0 to 6, 0|OFF|1|ON
Default Value
0, 0|OFF
Copyright © Itech Electronic Co., Ltd.
45
To Next Page
Loading...
